1965 Alpine A 110 vs. 2012 Mazda 3

To start off, 2012 Mazda 3 is newer by 47 year(s). Which means there will be less support and parts availability for 1965 Alpine A 110. In addition, the cost of maintenance, including insurance, on 1965 Alpine A 110 would be higher. At 2,000 cc (4 cylinders), 2012 Mazda 3 is equipped with a bigger engine. In terms of performance, 2012 Mazda 3 (148 HP @ 6500 RPM) has 99 more horse power than 1965 Alpine A 110. (49 HP @ 5200 RPM) In normal driving conditions, 2012 Mazda 3 should accelerate faster than 1965 Alpine A 110. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mazda 3 weights approximately 725 kg more than 1965 Alpine A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Alpine A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Alpine A 110. However, in wet, icy, snow, or gravel driving conditions, 2012 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1965 Alpine A 110 2012 Mazda 3
Make Alpine Mazda
Model A 110 3
Year Released 1965 2012
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 956 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 49 HP 148 HP
Engine RPM 5200 RPM 6500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 575 kg 1300 kg
Vehicle Length 3860 mm 4590 mm
Vehicle Width 1470 mm 1755 mm
Vehicle Height 1140 mm 1471 mm
Wheelbase Size 2140 mm 2639 mm
Fuel Tank Capacity 38 L 55 L