1965 Austin A 60 vs. 2008 SsangYong Stavic
To start off, 2008 SsangYong Stavic is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Austin A 60. In addition, the cost of maintenance, including insurance, on 1965 Austin A 60 would be higher. At 3,199 cc (6 cylinders), 2008 SsangYong Stavic is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 SsangYong Stavic weights approximately 914 kg more than 1965 Austin A 60.
Because 2008 SsangYong Stavic is four wheel drive (4WD), it will have significant more traction and grip than 1965 Austin A 60. In wet, icy, snow, or gravel driving conditions, 2008 SsangYong Stavic will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 SsangYong Stavic (312 Nm @ 4600 RPM) has 190 more torque (in Nm) than 1965 Austin A 60. (122 Nm @ 2500 RPM). This means 2008 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1965 Austin A 60.
Compare all specifications:
1965 Austin A 60 | 2008 SsangYong Stavic | |
Make | Austin | SsangYong |
Model | A 60 | Stavic |
Year Released | 1965 | 2008 |
Engine Position | Front | Front |
Engine Size | 1621 cc | 3199 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 60 HP | 0 HP |
Torque | 122 Nm | 312 Nm |
Torque RPM | 2500 RPM | 4600 RPM |
Engine Compression Ratio | 8.3:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 3 doors | 5 doors |
Vehicle Weight | 1120 kg | 2034 kg |
Vehicle Length | 4440 mm | 5130 mm |
Vehicle Width | 1620 mm | 1830 mm |
Vehicle Height | 1530 mm | 1920 mm |
Wheelbase Size | 2550 mm | 3010 mm |
Fuel Tank Capacity | 34 L | 80 L |