1965 Austin A 90 vs. 2013 Hyundai Santa Fe

To start off, 2013 Hyundai Santa Fe is newer by 48 year(s). Which means there will be less support and parts availability for 1965 Austin A 90. In addition, the cost of maintenance, including insurance, on 1965 Austin A 90 would be higher. At 2,910 cc (6 cylinders), 1965 Austin A 90 is equipped with a bigger engine. In terms of performance, 2013 Hyundai Santa Fe (187 HP @ 6300 RPM) has 67 more horse power than 1965 Austin A 90. (120 HP @ 4750 RPM) In normal driving conditions, 2013 Hyundai Santa Fe should accelerate faster than 1965 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2013 Hyundai Santa Fe weights approximately 70 kg more than 1965 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 2013 Hyundai Santa Fe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Hyundai Santa Fe (245 Nm @ 4250 RPM) has 24 more torque (in Nm) than 1965 Austin A 90. (221 Nm @ 2750 RPM). This means 2013 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 1965 Austin A 90. 2013 Hyundai Santa Fe has automatic transmission and 1965 Austin A 90 has manual transmission. 1965 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Hyundai Santa Fe will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Austin A 90 2013 Hyundai Santa Fe
Make Austin Hyundai
Model A 90 Santa Fe
Year Released 1965 2013
Engine Position Front Front
Engine Size 2910 cc 2359 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 120 HP 187 HP
Engine RPM 4750 RPM 6300 RPM
Torque 221 Nm 245 Nm
Torque RPM 2750 RPM 4250 RPM
Engine Bore Size 83.4 mm 88 mm
Engine Stroke Size 88.9 mm 97 mm
Engine Compression Ratio 8.3:1 11.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1570 kg 1640 kg
Vehicle Length 4780 mm 4690 mm
Vehicle Width 1750 mm 1880 mm
Vehicle Height 1540 mm 1690 mm
Wheelbase Size 2750 mm 2700 mm
Fuel Tank Capacity 34 L 66 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]