1965 Austin-Healey 3000 Mk III vs. 2008 GMC Yukon
To start off, 2008 GMC Yukon is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1965 Austin-Healey 3000 Mk III would be higher. At 4,802 cc (8 cylinders), 2008 GMC Yukon is equipped with a bigger engine. In terms of performance, 2008 GMC Yukon (295 HP @ 5200 RPM) has 149 more horse power than 1965 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 2008 GMC Yukon should accelerate faster than 1965 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Yukon weights approximately 961 kg more than 1965 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Austin-Healey 3000 Mk III is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Austin-Healey 3000 Mk III. However, in wet, icy, snow, or gravel driving conditions, 2008 GMC Yukon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Yukon (414 Nm @ 4800 RPM) has 248 more torque (in Nm) than 1965 Austin-Healey 3000 Mk III. (166 Nm @ 3500 RPM). This means 2008 GMC Yukon will have an easier job in driving up hills or pulling heavy equipment than 1965 Austin-Healey 3000 Mk III. 2008 GMC Yukon has automatic transmission and 1965 Austin-Healey 3000 Mk III has manual transmission. 1965 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Yukon will be easier to drive especially in heavy traffic.
Compare all specifications:
1965 Austin-Healey 3000 Mk III | 2008 GMC Yukon | |
Make | Austin-Healey | GMC |
Model | 3000 Mk III | Yukon |
Year Released | 1965 | 2008 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 4802 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 146 HP | 295 HP |
Engine RPM | 5250 RPM | 5200 RPM |
Torque | 166 Nm | 414 Nm |
Torque RPM | 3500 RPM | 4800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1180 kg | 2141 kg |
Vehicle Length | 4010 mm | 5140 mm |
Vehicle Width | 1540 mm | 2010 mm |
Vehicle Height | 1250 mm | 1960 mm |
Wheelbase Size | 2340 mm | 2950 mm |
Fuel Tank Capacity | 54 L | 98 L |