1965 Austin-Healey 3000 Mk III vs. 2008 Mazda 6
To start off, 2008 Mazda 6 is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1965 Austin-Healey 3000 Mk III would be higher. At 2,912 cc (6 cylinders), 1965 Austin-Healey 3000 Mk III is equipped with a bigger engine. In terms of performance, 2008 Mazda 6 (156 HP @ 6500 RPM) has 10 more horse power than 1965 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 2008 Mazda 6 should accelerate faster than 1965 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 6 weights approximately 149 kg more than 1965 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Austin-Healey 3000 Mk III is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Austin-Healey 3000 Mk III. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 6 (209 Nm @ 4000 RPM) has 43 more torque (in Nm) than 1965 Austin-Healey 3000 Mk III. (166 Nm @ 3500 RPM). This means 2008 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1965 Austin-Healey 3000 Mk III. 2008 Mazda 6 has automatic transmission and 1965 Austin-Healey 3000 Mk III has manual transmission. 1965 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1965 Austin-Healey 3000 Mk III | 2008 Mazda 6 | |
| Make | Austin-Healey | Mazda |
| Model | 3000 Mk III | 6 |
| Year Released | 1965 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 2260 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 146 HP | 156 HP |
| Engine RPM | 5250 RPM | 6500 RPM |
| Torque | 166 Nm | 209 Nm |
| Torque RPM | 3500 RPM | 4000 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1180 kg | 1329 kg |
| Vehicle Length | 4010 mm | 4750 mm |
| Vehicle Width | 1540 mm | 1790 mm |
| Vehicle Height | 1250 mm | 1450 mm |
| Wheelbase Size | 2340 mm | 2680 mm |
| Fuel Tank Capacity | 54 L | 68 L |
