1965 Avanti Avanti vs. 1968 Holden Monaro

To start off, 1968 Holden Monaro is newer by 3 year(s). Which means there will be less support and parts availability for 1965 Avanti Avanti. In addition, the cost of maintenance, including insurance, on 1965 Avanti Avanti would be higher. At 5,354 cc (8 cylinders), 1965 Avanti Avanti is equipped with a bigger engine. In terms of performance, 1965 Avanti Avanti (254 HP @ 5000 RPM) has 146 more horse power than 1968 Holden Monaro. (108 HP @ 4200 RPM). In normal driving conditions, 1965 Avanti Avanti should accelerate faster than 1968 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 1965 Avanti Avanti weights approximately 170 kg more than 1968 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Avanti Avanti (488 Nm @ 3400 RPM) has 243 more torque (in Nm) than 1968 Holden Monaro. (245 Nm @ 1600 RPM). This means 1965 Avanti Avanti will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Monaro.

Compare all specifications:

1965 Avanti Avanti 1968 Holden Monaro
Make Avanti Holden
Model Avanti Monaro
Year Released 1965 1968
Engine Position Front Front
Engine Size 5354 cc 3043 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 254 HP 108 HP
Engine RPM 5000 RPM 4200 RPM
Torque 488 Nm 245 Nm
Torque RPM 3400 RPM 1600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1460 kg 1290 kg
Vehicle Length 4910 mm 4700 mm
Vehicle Width 1800 mm 1830 mm
Vehicle Height 1380 mm 1400 mm
Wheelbase Size 2780 mm 2830 mm