1965 Chevrolet Corvette vs. 2002 Chrysler Sebring
To start off, 2002 Chrysler Sebring is newer by 37 year(s). Which means there will be less support and parts availability for 1965 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1965 Chevrolet Corvette would be higher. At 5,354 cc (8 cylinders), 1965 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 1965 Chevrolet Corvette (251 HP @ 4400 RPM) has 102 more horse power than 2002 Chrysler Sebring. (149 HP @ 5200 RPM). In normal driving conditions, 1965 Chevrolet Corvette should accelerate faster than 2002 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1965 Chevrolet Corvette weights approximately 24 kg more than 2002 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Chevrolet Corvette (475 Nm @ 2800 RPM) has 249 more torque (in Nm) than 2002 Chrysler Sebring. (226 Nm @ 4000 RPM). This means 1965 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 2002 Chrysler Sebring. 2002 Chrysler Sebring has automatic transmission and 1965 Chevrolet Corvette has manual transmission. 1965 Chevrolet Corvette will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1965 Chevrolet Corvette | 2002 Chrysler Sebring | |
Make | Chevrolet | Chrysler |
Model | Corvette | Sebring |
Year Released | 1965 | 2002 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 5354 cc | 2343 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 251 HP | 149 HP |
Engine RPM | 4400 RPM | 5200 RPM |
Torque | 475 Nm | 226 Nm |
Torque RPM | 2800 RPM | 4000 RPM |
Engine Bore Size | 101.6 mm | 87.4 mm |
Engine Stroke Size | 82.6 mm | 101 mm |
Engine Compression Ratio | 10.5:1 | 9.4:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1476 kg | 1452 kg |
Vehicle Length | 4460 mm | 4850 mm |
Vehicle Width | 1770 mm | 1800 mm |
Vehicle Height | 1270 mm | 1400 mm |
Wheelbase Size | 2500 mm | 2880 mm |
Fuel Tank Capacity | 76 L | 61 L |