1965 Fiat Coupe vs. 2006 Ford Ranger
To start off, 2006 Ford Ranger is newer by 41 year(s). Which means there will be less support and parts availability for 1965 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1965 Fiat Coupe would be higher. At 2,983 cc (6 cylinders), 2006 Ford Ranger is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2006 Ford Ranger weights approximately 485 kg more than 1965 Fiat Coupe.
Let's talk about torque, 2006 Ford Ranger (244 Nm @ 3950 RPM) has 44 more torque (in Nm) than 1965 Fiat Coupe. (200 Nm @ 4000 RPM). This means 2006 Ford Ranger will have an easier job in driving up hills or pulling heavy equipment than 1965 Fiat Coupe.
Compare all specifications:
| 1965 Fiat Coupe | 2006 Ford Ranger | |
| Make | Fiat | Ford |
| Model | Coupe | Ranger |
| Year Released | 1965 | 2006 |
| Body Type | Coupe | Pickup |
| Engine Position | Front | Front |
| Engine Size | 2277 cc | 2983 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 148 HP | 148 HP |
| Engine RPM | 5600 RPM | 4900 RPM |
| Torque | 200 Nm | 244 Nm |
| Torque RPM | 4000 RPM | 3950 RPM |
| Engine Bore Size | 78 mm | 88.9 mm |
| Engine Stroke Size | 79.5 mm | 78.7 mm |
| Engine Compression Ratio | 9.0:1 | 9.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 4 seats | 3 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1230 kg | 1715 kg |
| Vehicle Length | 4630 mm | 4790 mm |
| Vehicle Width | 1640 mm | 1770 mm |
| Vehicle Height | 1370 mm | 1690 mm |
| Wheelbase Size | 2660 mm | 2840 mm |
| Fuel Tank Capacity | 38 L | 64 L |
