1965 Fiat Coupe vs. 2013 Mazda 5

To start off, 2013 Mazda 5 is newer by 48 year(s). Which means there will be less support and parts availability for 1965 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1965 Fiat Coupe would be higher. At 2,489 cc (4 cylinders), 2013 Mazda 5 is equipped with a bigger engine. In terms of performance, 2013 Mazda 5 (155 HP @ 6000 RPM) has 7 more horse power than 1965 Fiat Coupe. (148 HP @ 5600 RPM) In normal driving conditions, 2013 Mazda 5 should accelerate faster than 1965 Fiat Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda 5 weights approximately 321 kg more than 1965 Fiat Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 2013 Mazda 5 (221 Nm @ 4000 RPM) has 21 more torque (in Nm) than 1965 Fiat Coupe. (200 Nm @ 4000 RPM). This means 2013 Mazda 5 will have an easier job in driving up hills or pulling heavy equipment than 1965 Fiat Coupe.

Compare all specifications:

1965 Fiat Coupe 2013 Mazda 5
Make Fiat Mazda
Model Coupe 5
Year Released 1965 2013
Body Type Coupe Minivan
Engine Position Front Front
Engine Size 2277 cc 2489 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 155 HP
Engine RPM 5600 RPM 6000 RPM
Torque 200 Nm 221 Nm
Torque RPM 4000 RPM 4000 RPM
Engine Bore Size 78 mm 89 mm
Engine Stroke Size 79.5 mm 100 mm
Engine Compression Ratio 9.0:1 9.7:1
Fuel Type Gasoline Gasoline
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1230 kg 1551 kg
Vehicle Length 4630 mm 4585 mm
Vehicle Width 1640 mm 1750 mm
Vehicle Height 1370 mm 1615 mm
Wheelbase Size 2660 mm 2750 mm
Fuel Tank Capacity 38 L 60 L