1965 Fiat Coupe vs. 2013 Volvo X670
To start off, 2013 Volvo X670 is newer by 48 year(s). Which means there will be less support and parts availability for 1965 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1965 Fiat Coupe would be higher. At 3,000 cc (6 cylinders), 2013 Volvo X670 is equipped with a bigger engine. In terms of performance, 2013 Volvo X670 (296 HP @ 5600 RPM) has 148 more horse power than 1965 Fiat Coupe. (148 HP @ 5600 RPM) In normal driving conditions, 2013 Volvo X670 should accelerate faster than 1965 Fiat Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2013 Volvo X670 weights approximately 698 kg more than 1965 Fiat Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2013 Volvo X670 (441 Nm @ 4200 RPM) has 241 more torque (in Nm) than 1965 Fiat Coupe. (200 Nm @ 4000 RPM). This means 2013 Volvo X670 will have an easier job in driving up hills or pulling heavy equipment than 1965 Fiat Coupe.
Compare all specifications:
1965 Fiat Coupe | 2013 Volvo X670 | |
Make | Fiat | Volvo |
Model | Coupe | X670 |
Year Released | 1965 | 2013 |
Body Type | Coupe | Station Wagon |
Engine Position | Front | Front |
Engine Size | 2277 cc | 3000 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | dual-disk rotary |
Valves per Cylinder | 2 valves | 6 valves |
Horse Power | 148 HP | 296 HP |
Engine RPM | 5600 RPM | 5600 RPM |
Torque | 200 Nm | 441 Nm |
Torque RPM | 4000 RPM | 4200 RPM |
Engine Bore Size | 78 mm | 82 mm |
Engine Stroke Size | 79.5 mm | 93 mm |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1230 kg | 1928 kg |
Vehicle Length | 4630 mm | 4838 mm |
Vehicle Width | 1640 mm | 1870 mm |
Vehicle Height | 1370 mm | 1604 mm |
Wheelbase Size | 2660 mm | 2815 mm |