1965 Ginetta G10 vs. 1962 Lancia Appia
To start off, 1965 Ginetta G10 is newer by 3 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 4,726 cc (8 cylinders), 1965 Ginetta G10 is equipped with a bigger engine. In terms of performance, 1965 Ginetta G10 (290 HP @ 5000 RPM) has 243 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM). In normal driving conditions, 1965 Ginetta G10 should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1965 Ginetta G10 weights approximately 40 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1965 Ginetta G10 | 1962 Lancia Appia | |
| Make | Ginetta | Lancia |
| Model | G10 | Appia |
| Year Released | 1965 | 1962 |
| Engine Position | Middle | Front |
| Engine Size | 4726 cc | 1089 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 290 HP | 47 HP |
| Engine RPM | 5000 RPM | 4800 RPM |
| Engine Bore Size | 101.6 mm | 68 mm |
| Engine Stroke Size | 72.9 mm | 75 mm |
| Engine Compression Ratio | 10.0:1 | 8.0:1 |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 940 kg | 900 kg |
| Vehicle Length | 3990 mm | 4020 mm |
| Vehicle Width | 1510 mm | 1490 mm |
| Vehicle Height | 1280 mm | 1410 mm |
| Wheelbase Size | 2290 mm | 2520 mm |
| Fuel Tank Capacity | 72 L | 37 L |
