1965 Ginetta G10 vs. 1977 Mazda RX-3
To start off, 1977 Mazda RX-3 is newer by 12 year(s). Which means there will be less support and parts availability for 1965 Ginetta G10. In addition, the cost of maintenance, including insurance, on 1965 Ginetta G10 would be higher. At 4,726 cc (8 cylinders), 1965 Ginetta G10 is equipped with a bigger engine. In terms of performance, 1965 Ginetta G10 (290 HP @ 5000 RPM) has 190 more horse power than 1977 Mazda RX-3. (100 HP @ 7000 RPM). In normal driving conditions, 1965 Ginetta G10 should accelerate faster than 1977 Mazda RX-3. With that said, vehicle weight also plays an important factor in acceleration. 1965 Ginetta G10 weights approximately 88 kg more than 1977 Mazda RX-3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1965 Ginetta G10 | 1977 Mazda RX-3 | |
| Make | Ginetta | Mazda |
| Model | G10 | RX-3 |
| Year Released | 1965 | 1977 |
| Engine Position | Middle | Front |
| Engine Size | 4726 cc | 1964 cc |
| Engine Type | V | dual-disk rotary |
| Horse Power | 290 HP | 100 HP |
| Engine RPM | 5000 RPM | 7000 RPM |
| Drive Type | Rear | Rear |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 940 kg | 852 kg |
| Vehicle Length | 3990 mm | 4090 mm |
| Vehicle Width | 1510 mm | 1600 mm |
| Vehicle Height | 1280 mm | 1380 mm |
| Wheelbase Size | 2290 mm | 2320 mm |
| Fuel Tank Capacity | 72 L | 65 L |
