1965 Holden EH vs. 2013 Mazda 3

To start off, 2013 Mazda 3 is newer by 48 year(s). Which means there will be less support and parts availability for 1965 Holden EH. In addition, the cost of maintenance, including insurance, on 1965 Holden EH would be higher. At 2,930 cc (6 cylinders), 1965 Holden EH is equipped with a bigger engine. In terms of performance, 2013 Mazda 3 (167 HP @ 6000 RPM) has 67 more horse power than 1965 Holden EH. (100 HP @ 4000 RPM) In normal driving conditions, 2013 Mazda 3 should accelerate faster than 1965 Holden EH. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda 3 weights approximately 118 kg more than 1965 Holden EH. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Holden EH is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Holden EH. However, in wet, icy, snow, or gravel driving conditions, 2013 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Holden EH (238 Nm @ 1600 RPM) has 10 more torque (in Nm) than 2013 Mazda 3. (228 Nm @ 4000 RPM). This means 1965 Holden EH will have an easier job in driving up hills or pulling heavy equipment than 2013 Mazda 3. 1965 Holden EH has automatic transmission and 2013 Mazda 3 has manual transmission. 2013 Mazda 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1965 Holden EH will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Holden EH 2013 Mazda 3
Make Holden Mazda
Model EH 3
Year Released 1965 2013
Engine Position Front Front
Engine Size 2930 cc 2489 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 100 HP 167 HP
Engine RPM 4000 RPM 6000 RPM
Torque 238 Nm 228 Nm
Torque RPM 1600 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic 6-speed manual
Vehicle Weight 1185 kg 1303 kg
Vehicle Length 4560 mm 4595 mm
Vehicle Width 1740 mm 1755 mm
Vehicle Height 1490 mm 1470 mm
Wheelbase Size 2680 mm 2640 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]