1965 Lancia Flaminia vs. 2010 Hyundai i20
To start off, 2010 Hyundai i20 is newer by 45 year(s). Which means there will be less support and parts availability for 1965 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1965 Lancia Flaminia would be higher. At 2,774 cc (6 cylinders), 1965 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 1965 Lancia Flaminia (148 HP @ 5400 RPM) has 49 more horse power than 2010 Hyundai i20. (99 HP @ 5500 RPM). In normal driving conditions, 1965 Lancia Flaminia should accelerate faster than 2010 Hyundai i20. With that said, vehicle weight also plays an important factor in acceleration. 1965 Lancia Flaminia weights approximately 265 kg more than 2010 Hyundai i20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1965 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2010 Hyundai i20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Lancia Flaminia (225 Nm @ 3500 RPM) has 88 more torque (in Nm) than 2010 Hyundai i20. (137 Nm @ 4200 RPM). This means 1965 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai i20. 2010 Hyundai i20 has automatic transmission and 1965 Lancia Flaminia has manual transmission. 1965 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Hyundai i20 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1965 Lancia Flaminia | 2010 Hyundai i20 | |
| Make | Lancia | Hyundai |
| Model | Flaminia | i20 |
| Year Released | 1965 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2774 cc | 1396 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 148 HP | 99 HP |
| Engine RPM | 5400 RPM | 5500 RPM |
| Torque | 225 Nm | 137 Nm |
| Torque RPM | 3500 RPM | 4200 RPM |
| Engine Bore Size | 85 mm | 77 mm |
| Engine Stroke Size | 81.5 mm | 75 mm |
| Engine Compression Ratio | 9.0:1 | 17:01 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1420 kg | 1155 kg |
| Vehicle Length | 4510 mm | 3940 mm |
| Vehicle Width | 1670 mm | 1710 mm |
| Vehicle Height | 1290 mm | 1490 mm |
| Wheelbase Size | 2530 mm | 2525 mm |
