1965 Lancia Fulvia vs. 2009 Mercedes-Benz E
To start off, 2009 Mercedes-Benz E is newer by 44 year(s). Which means there will be less support and parts availability for 1965 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1965 Lancia Fulvia would be higher. At 3,498 cc (6 cylinders), 2009 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz E (268 HP) has 188 more horse power than 1965 Lancia Fulvia. (80 HP) In normal driving conditions, 2009 Mercedes-Benz E should accelerate faster than 1965 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz E weights approximately 401 kg more than 1965 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2009 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 1965 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz E (350 Nm @ 2400 RPM) has 246 more torque (in Nm) than 1965 Lancia Fulvia. (104 Nm @ 4000 RPM). This means 2009 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1965 Lancia Fulvia. 2009 Mercedes-Benz E has automatic transmission and 1965 Lancia Fulvia has manual transmission. 1965 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
1965 Lancia Fulvia | 2009 Mercedes-Benz E | |
Make | Lancia | Mercedes-Benz |
Model | Fulvia | E |
Year Released | 1965 | 2009 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1242 cc | 3498 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 80 HP | 268 HP |
Torque | 104 Nm | 350 Nm |
Torque RPM | 4000 RPM | 2400 RPM |
Engine Bore Size | 76 mm | 92.9 mm |
Engine Stroke Size | 67 mm | 86 mm |
Engine Compression Ratio | 9.0:1 | 10.7:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 161 km/hour | 250 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 925 kg | 1326 kg |
Vehicle Length | 3980 mm | 4870 mm |
Vehicle Width | 1570 mm | 1490 mm |
Vehicle Height | 1300 mm | 1830 mm |
Wheelbase Size | 2340 mm | 2860 mm |
Fuel Consumption Overall | 10.1 L/100km | 9.7 L/100km |
Fuel Tank Capacity | 38 L | 80 L |