1965 Peugeot 204 vs. 2010 BMW 120

To start off, 2010 BMW 120 is newer by 45 year(s). Which means there will be less support and parts availability for 1965 Peugeot 204. In addition, the cost of maintenance, including insurance, on 1965 Peugeot 204 would be higher. At 1,995 cc (4 cylinders), 2010 BMW 120 is equipped with a bigger engine. In terms of performance, 2010 BMW 120 (155 HP @ 6700 RPM) has 101 more horse power than 1965 Peugeot 204. (54 HP @ 5750 RPM) In normal driving conditions, 2010 BMW 120 should accelerate faster than 1965 Peugeot 204. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 120 weights approximately 449 kg more than 1965 Peugeot 204. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 1965 Peugeot 204, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 120 (200 Nm @ 4250 RPM) has 111 more torque (in Nm) than 1965 Peugeot 204. (89 Nm @ 3500 RPM). This means 2010 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 1965 Peugeot 204. 2010 BMW 120 has automatic transmission and 1965 Peugeot 204 has manual transmission. 1965 Peugeot 204 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 120 will be easier to drive especially in heavy traffic.

Compare all specifications:

1965 Peugeot 204 2010 BMW 120
Make Peugeot BMW
Model 204 120
Year Released 1965 2010
Engine Position Front Front
Engine Size 1130 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 54 HP 155 HP
Engine RPM 5750 RPM 6700 RPM
Torque 89 Nm 200 Nm
Torque RPM 3500 RPM 4250 RPM
Engine Bore Size 75 mm 84 mm
Engine Stroke Size 64 mm 90 mm
Engine Compression Ratio 8.8:1 12.0:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 936 kg 1385 kg
Vehicle Length 3980 mm 4250 mm
Vehicle Width 1570 mm 1430 mm
Vehicle Height 1440 mm 1750 mm
Wheelbase Size 2600 mm 2670 mm
Fuel Tank Capacity 50 L 53 L