1966 Abarth 700 vs. 2003 Avanti Studebaker

To start off, 2003 Avanti Studebaker is newer by 37 year(s). Which means there will be less support and parts availability for 1966 Abarth 700. In addition, the cost of maintenance, including insurance, on 1966 Abarth 700 would be higher. At 6,751 cc (10 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (306 HP @ 4250 RPM) has 243 more horse power than 1966 Abarth 700. (63 HP @ 7600 RPM) In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1966 Abarth 700. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 2205 kg more than 1966 Abarth 700. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1966 Abarth 700. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (425 Nm @ 3250 RPM) has 356 more torque (in Nm) than 1966 Abarth 700. (69 Nm @ 5800 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1966 Abarth 700. 2003 Avanti Studebaker has automatic transmission and 1966 Abarth 700 has manual transmission. 1966 Abarth 700 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Abarth 700 2003 Avanti Studebaker
Make Abarth Avanti
Model 700 Studebaker
Year Released 1966 2003
Engine Position Rear Front
Engine Size 696 cc 6751 cc
Engine Cylinders 4 cylinders 10 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 63 HP 306 HP
Engine RPM 7600 RPM 4250 RPM
Torque 69 Nm 425 Nm
Torque RPM 5800 RPM 3250 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Vehicle Weight 570 kg 2775 kg
Vehicle Length 3480 mm 5490 mm
Vehicle Width 1360 mm 2040 mm
Vehicle Height 1110 mm 2040 mm
Wheelbase Size 2010 mm 3410 mm