1966 Abarth Mono 1000 vs. 2005 Chevrolet Blazer
To start off, 2005 Chevrolet Blazer is newer by 39 year(s). Which means there will be less support and parts availability for 1966 Abarth Mono 1000. In addition, the cost of maintenance, including insurance, on 1966 Abarth Mono 1000 would be higher. At 4,292 cc (6 cylinders), 2005 Chevrolet Blazer is equipped with a bigger engine. In terms of performance, 2005 Chevrolet Blazer (190 HP @ 5600 RPM) has 131 more horse power than 1966 Abarth Mono 1000. (59 HP @ 6600 RPM) In normal driving conditions, 2005 Chevrolet Blazer should accelerate faster than 1966 Abarth Mono 1000. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chevrolet Blazer weights approximately 1008 kg more than 1966 Abarth Mono 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2005 Chevrolet Blazer (339 Nm) has 249 more torque (in Nm) than 1966 Abarth Mono 1000. (90 Nm). This means 2005 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1966 Abarth Mono 1000.
Compare all specifications:
1966 Abarth Mono 1000 | 2005 Chevrolet Blazer | |
Make | Abarth | Chevrolet |
Model | Mono 1000 | Blazer |
Year Released | 1966 | 2005 |
Engine Position | Rear | Front |
Engine Size | 982 cc | 4292 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 190 HP |
Engine RPM | 6600 RPM | 5600 RPM |
Torque | 90 Nm | 339 Nm |
Engine Bore Size | 65 mm | 102 mm |
Engine Stroke Size | 74 mm | 88 mm |
Engine Compression Ratio | 9.8:1 | 9.2:1 |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 564 kg | 1572 kg |
Vehicle Length | 3490 mm | 4510 mm |
Vehicle Width | 1420 mm | 1730 mm |
Vehicle Height | 1170 mm | 1660 mm |
Wheelbase Size | 2010 mm | 2690 mm |
Fuel Tank Capacity | 59 L | 72 L |