1966 Alfa Romeo 2600 vs. 2000 Kia Sephia II
To start off, 2000 Kia Sephia II is newer by 34 year(s). Which means there will be less support and parts availability for 1966 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1966 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1966 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 1966 Alfa Romeo 2600 (163 HP @ 5900 RPM) has 63 more horse power than 2000 Kia Sephia II. (100 HP @ 5500 RPM). In normal driving conditions, 1966 Alfa Romeo 2600 should accelerate faster than 2000 Kia Sephia II. With that said, vehicle weight also plays an important factor in acceleration. 1966 Alfa Romeo 2600 weights approximately 54 kg more than 2000 Kia Sephia II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2000 Kia Sephia II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Alfa Romeo 2600 (220 Nm) has 75 more torque (in Nm) than 2000 Kia Sephia II. (145 Nm). This means 1966 Alfa Romeo 2600 will have an easier job in driving up hills or pulling heavy equipment than 2000 Kia Sephia II. 2000 Kia Sephia II has automatic transmission and 1966 Alfa Romeo 2600 has manual transmission. 1966 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Kia Sephia II will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Alfa Romeo 2600 | 2000 Kia Sephia II | |
Make | Alfa Romeo | Kia |
Model | 2600 | Sephia II |
Year Released | 1966 | 2000 |
Engine Position | Front | Front |
Engine Size | 2584 cc | 1594 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 163 HP | 100 HP |
Engine RPM | 5900 RPM | 5500 RPM |
Torque | 220 Nm | 145 Nm |
Engine Bore Size | 83 mm | 78 mm |
Engine Stroke Size | 79.6 mm | 83.4 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1116 kg | 1062 kg |
Vehicle Length | 4410 mm | 4520 mm |
Vehicle Width | 1660 mm | 1730 mm |
Vehicle Height | 1330 mm | 1420 mm |
Wheelbase Size | 2510 mm | 2570 mm |
Fuel Tank Capacity | 47 L | 65 L |