1966 Alfa Romeo 2600 vs. 2006 Lancia Phedra
To start off, 2006 Lancia Phedra is newer by 40 year(s). Which means there will be less support and parts availability for 1966 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1966 Alfa Romeo 2600 would be higher. At 2,944 cc (6 cylinders), 2006 Lancia Phedra is equipped with a bigger engine. In terms of performance, 2006 Lancia Phedra (201 HP @ 6000 RPM) has 38 more horse power than 1966 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2006 Lancia Phedra should accelerate faster than 1966 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2006 Lancia Phedra weights approximately 668 kg more than 1966 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2006 Lancia Phedra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Lancia Phedra (285 Nm @ 3750 RPM) has 65 more torque (in Nm) than 1966 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2006 Lancia Phedra will have an easier job in driving up hills or pulling heavy equipment than 1966 Alfa Romeo 2600. 2006 Lancia Phedra has automatic transmission and 1966 Alfa Romeo 2600 has manual transmission. 1966 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Lancia Phedra will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1966 Alfa Romeo 2600 | 2006 Lancia Phedra | |
| Make | Alfa Romeo | Lancia |
| Model | 2600 | Phedra |
| Year Released | 1966 | 2006 |
| Engine Position | Front | Front |
| Engine Size | 2584 cc | 2944 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 163 HP | 201 HP |
| Engine RPM | 5900 RPM | 6000 RPM |
| Torque | 220 Nm | 285 Nm |
| Torque RPM | 4000 RPM | 3750 RPM |
| Engine Bore Size | 83 mm | 87 mm |
| Engine Stroke Size | 79.6 mm | 82.6 mm |
| Engine Compression Ratio | 9.0:1 | 10.9:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 210 km/hour | 205 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1116 kg | 1784 kg |
| Vehicle Length | 4410 mm | 4760 mm |
| Vehicle Width | 1660 mm | 1870 mm |
| Vehicle Height | 1330 mm | 1760 mm |
| Wheelbase Size | 2510 mm | 2830 mm |
| Fuel Tank Capacity | 47 L | 80 L |
