1966 Alfa Romeo 2600 vs. 2013 Honda CR-V

To start off, 2013 Honda CR-V is newer by 47 year(s). Which means there will be less support and parts availability for 1966 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1966 Alfa Romeo 2600 would be higher. At 2,584 cc (6 cylinders), 1966 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 2013 Honda CR-V (182 HP @ 7000 RPM) has 19 more horse power than 1966 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2013 Honda CR-V should accelerate faster than 1966 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2013 Honda CR-V weights approximately 410 kg more than 1966 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2013 Honda CR-V, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Honda CR-V (221 Nm @ 4400 RPM) has 1 more torque (in Nm) than 1966 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2013 Honda CR-V will have an easier job in driving up hills or pulling heavy equipment than 1966 Alfa Romeo 2600. 2013 Honda CR-V has automatic transmission and 1966 Alfa Romeo 2600 has manual transmission. 1966 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Honda CR-V will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Alfa Romeo 2600 2013 Honda CR-V
Make Alfa Romeo Honda
Model 2600 CR-V
Year Released 1966 2013
Engine Position Front Front
Engine Size 2584 cc 2354 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 163 HP 182 HP
Engine RPM 5900 RPM 7000 RPM
Torque 220 Nm 221 Nm
Torque RPM 4000 RPM 4400 RPM
Engine Bore Size 83 mm 87 mm
Engine Stroke Size 79.6 mm 99 mm
Engine Compression Ratio 9.0:1 10.0 : 1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1116 kg 1526 kg
Vehicle Length 4410 mm 4530 mm
Vehicle Width 1660 mm 1820 mm
Vehicle Height 1330 mm 1644 mm
Wheelbase Size 2510 mm 2620 mm
Fuel Tank Capacity 47 L 58 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]