1966 Austin-Healey 3000 Mk III vs. 2007 Jeep Commander
To start off, 2007 Jeep Commander is newer by 41 year(s). Which means there will be less support and parts availability for 1966 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1966 Austin-Healey 3000 Mk III would be higher. At 4,701 cc (8 cylinders), 2007 Jeep Commander is equipped with a bigger engine. In terms of performance, 2007 Jeep Commander (236 HP @ 4500 RPM) has 90 more horse power than 1966 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 2007 Jeep Commander should accelerate faster than 1966 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 2007 Jeep Commander weights approximately 497 kg more than 1966 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2007 Jeep Commander is four wheel drive (4WD), it will have significant more traction and grip than 1966 Austin-Healey 3000 Mk III. In wet, icy, snow, or gravel driving conditions, 2007 Jeep Commander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Jeep Commander (414 Nm @ 3600 RPM) has 249 more torque (in Nm) than 1966 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 2007 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1966 Austin-Healey 3000 Mk III. 2007 Jeep Commander has automatic transmission and 1966 Austin-Healey 3000 Mk III has manual transmission. 1966 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Jeep Commander will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Austin-Healey 3000 Mk III | 2007 Jeep Commander | |
Make | Austin-Healey | Jeep |
Model | 3000 Mk III | Commander |
Year Released | 1966 | 2007 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 4701 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 146 HP | 236 HP |
Engine RPM | 5250 RPM | 4500 RPM |
Torque | 165 Nm | 414 Nm |
Torque RPM | 3500 RPM | 3600 RPM |
Engine Bore Size | 83.4 mm | 93 mm |
Engine Stroke Size | 88.9 mm | 86.7 mm |
Engine Compression Ratio | 9.0:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1180 kg | 1677 kg |
Vehicle Length | 4010 mm | 4790 mm |
Vehicle Width | 1540 mm | 1910 mm |
Vehicle Height | 1250 mm | 1830 mm |
Wheelbase Size | 2340 mm | 2790 mm |
Fuel Tank Capacity | 54 L | 80 L |