1966 BMW 1602 vs. 1979 BMW 725
To start off, 1979 BMW 725 is newer by 13 year(s). Which means there will be less support and parts availability for 1966 BMW 1602. In addition, the cost of maintenance, including insurance, on 1966 BMW 1602 would be higher. At 2,495 cc (6 cylinders), 1979 BMW 725 is equipped with a bigger engine. In terms of performance, 1979 BMW 725 (148 HP @ 5500 RPM) has 65 more horse power than 1966 BMW 1602. (83 HP @ 5700 RPM) In normal driving conditions, 1979 BMW 725 should accelerate faster than 1966 BMW 1602.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 BMW 725 (215 Nm @ 4000 RPM) has 85 more torque (in Nm) than 1966 BMW 1602. (130 Nm @ 3500 RPM). This means 1979 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1966 BMW 1602.
Compare all specifications:
| 1966 BMW 1602 | 1979 BMW 725 | |
| Make | BMW | BMW |
| Model | 1602 | 725 |
| Year Released | 1966 | 1979 |
| Engine Position | Front | Front |
| Engine Size | 1574 cc | 2495 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 83 HP | 148 HP |
| Engine RPM | 5700 RPM | 5500 RPM |
| Torque | 130 Nm | 215 Nm |
| Torque RPM | 3500 RPM | 4000 RPM |
| Engine Compression Ratio | 8.6:1 | 9.6:1 |
| Drive Type | Rear | Rear |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Length | 4240 mm | 4870 mm |
| Vehicle Width | 1600 mm | 1810 mm |
| Vehicle Height | 1420 mm | 1440 mm |
| Wheelbase Size | 2510 mm | 2810 mm |
