1966 Bristol 409 vs. 2010 Chevrolet Captiva

To start off, 2010 Chevrolet Captiva is newer by 44 year(s). Which means there will be less support and parts availability for 1966 Bristol 409. In addition, the cost of maintenance, including insurance, on 1966 Bristol 409 would be higher. At 5,211 cc (8 cylinders), 1966 Bristol 409 is equipped with a bigger engine. In terms of performance, 1966 Bristol 409 (215 HP @ 4400 RPM) has 80 more horse power than 2010 Chevrolet Captiva. (135 HP @ 5000 RPM). In normal driving conditions, 1966 Bristol 409 should accelerate faster than 2010 Chevrolet Captiva. With that said, vehicle weight also plays an important factor in acceleration. 1966 Bristol 409 weights approximately 339 kg more than 2010 Chevrolet Captiva. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Bristol 409 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Bristol 409. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Captiva, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Bristol 409 (463 Nm @ 2800 RPM) has 243 more torque (in Nm) than 2010 Chevrolet Captiva. (220 Nm @ 2200 RPM). This means 1966 Bristol 409 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chevrolet Captiva. 1966 Bristol 409 has automatic transmission and 2010 Chevrolet Captiva has manual transmission. 2010 Chevrolet Captiva will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Bristol 409 will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Bristol 409 2010 Chevrolet Captiva
Make Bristol Chevrolet
Model 409 Captiva
Year Released 1966 2010
Engine Position Front Front
Engine Size 5211 cc 2405 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 215 HP 135 HP
Engine RPM 4400 RPM 5000 RPM
Torque 463 Nm 220 Nm
Torque RPM 2800 RPM 2200 RPM
Engine Bore Size 98.6 mm 87.5 mm
Engine Stroke Size 84.1 mm 100 mm
Engine Compression Ratio 9.0:1 9.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 7 seats
Vehicle Weight 1600 kg 1261 kg
Vehicle Length 4920 mm 4640 mm
Vehicle Width 1740 mm 1760 mm
Vehicle Height 1510 mm 1860 mm
Wheelbase Size 2910 mm 2710 mm
Fuel Tank Capacity 81 L 65 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]