1966 Chrysler New Yorker vs. 1973 Lancia Fulvia
To start off, 1973 Lancia Fulvia is newer by 7 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,206 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (185 HP @ 3600 RPM) has 73 more horse power than 1973 Lancia Fulvia. (112 HP @ 6000 RPM). In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 1973 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 1163 kg more than 1973 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 1973 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (420 Nm @ 2400 RPM) has 267 more torque (in Nm) than 1973 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 1973 Lancia Fulvia. 1966 Chrysler New Yorker has automatic transmission and 1973 Lancia Fulvia has manual transmission. 1973 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1966 Chrysler New Yorker | 1973 Lancia Fulvia | |
| Make | Chrysler | Lancia |
| Model | New Yorker | Fulvia |
| Year Released | 1966 | 1973 |
| Engine Position | Front | Front |
| Engine Size | 7206 cc | 1584 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 185 HP | 112 HP |
| Engine RPM | 3600 RPM | 6000 RPM |
| Torque | 420 Nm | 153 Nm |
| Torque RPM | 2400 RPM | 4500 RPM |
| Engine Bore Size | 109.7 mm | 82.1 mm |
| Engine Stroke Size | 95.3 mm | 75 mm |
| Engine Compression Ratio | 8.2:1 | 10.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 2163 kg | 1000 kg |
| Vehicle Length | 5870 mm | 3990 mm |
| Vehicle Width | 2030 mm | 1570 mm |
| Vehicle Height | 1390 mm | 1330 mm |
| Wheelbase Size | 3160 mm | 2340 mm |
| Fuel Tank Capacity | 100 L | 38 L |
