1966 Chrysler New Yorker vs. 1988 Seat Marbella
To start off, 1988 Seat Marbella is newer by 22 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,206 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (185 HP @ 3600 RPM) has 150 more horse power than 1988 Seat Marbella. (35 HP @ 5400 RPM). In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 1988 Seat Marbella. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 1483 kg more than 1988 Seat Marbella. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 1988 Seat Marbella, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (420 Nm @ 2400 RPM) has 364 more torque (in Nm) than 1988 Seat Marbella. (56 Nm @ 2800 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 1988 Seat Marbella. 1966 Chrysler New Yorker has automatic transmission and 1988 Seat Marbella has manual transmission. 1988 Seat Marbella will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1966 Chrysler New Yorker | 1988 Seat Marbella | |
| Make | Chrysler | Seat |
| Model | New Yorker | Marbella |
| Year Released | 1966 | 1988 |
| Engine Position | Front | Front |
| Engine Size | 7206 cc | 843 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 185 HP | 35 HP |
| Engine RPM | 3600 RPM | 5400 RPM |
| Torque | 420 Nm | 56 Nm |
| Torque RPM | 2400 RPM | 2800 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 2163 kg | 680 kg |
| Vehicle Length | 5870 mm | 3480 mm |
| Vehicle Width | 2030 mm | 1510 mm |
| Vehicle Height | 1390 mm | 1450 mm |
| Wheelbase Size | 3160 mm | 2170 mm |
