1966 Chrysler New Yorker vs. 2012 Fiat 500
To start off, 2012 Fiat 500 is newer by 46 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,206 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (185 HP @ 3600 RPM) has 84 more horse power than 2012 Fiat 500. (101 HP @ 6500 RPM). In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 2012 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 1091 kg more than 2012 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (420 Nm @ 2400 RPM) has 287 more torque (in Nm) than 2012 Fiat 500. (133 Nm @ 4000 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat 500. 1966 Chrysler New Yorker has automatic transmission and 2012 Fiat 500 has manual transmission. 2012 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Chrysler New Yorker | 2012 Fiat 500 | |
Make | Chrysler | Fiat |
Model | New Yorker | 500 |
Year Released | 1966 | 2012 |
Engine Position | Front | Front |
Engine Size | 7206 cc | 1368 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 185 HP | 101 HP |
Engine RPM | 3600 RPM | 6500 RPM |
Torque | 420 Nm | 133 Nm |
Torque RPM | 2400 RPM | 4000 RPM |
Top Speed | 175 km/hour | 182 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | 5-speed manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 2163 kg | 1072 kg |
Vehicle Length | 5870 mm | 3546 mm |
Vehicle Width | 2030 mm | 1628 mm |
Vehicle Height | 1390 mm | 1519 mm |
Wheelbase Size | 3160 mm | 2301 mm |
Fuel Tank Capacity | 100 L | 40 L |