1966 Chrysler New Yorker vs. 2013 Kia RIO
To start off, 2013 Kia RIO is newer by 47 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,205 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (350 HP @ 4400 RPM) has 214 more horse power than 2013 Kia RIO. (136 HP @ 6300 RPM). In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 2013 Kia RIO. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 860 kg more than 2013 Kia RIO. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 2013 Kia RIO, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (651 Nm @ 2800 RPM) has 484 more torque (in Nm) than 2013 Kia RIO. (167 Nm @ 4850 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 2013 Kia RIO. 1966 Chrysler New Yorker has automatic transmission and 2013 Kia RIO has manual transmission. 2013 Kia RIO will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Chrysler New Yorker | 2013 Kia RIO | |
Make | Chrysler | Kia |
Model | New Yorker | RIO |
Year Released | 1966 | 2013 |
Engine Position | Front | Front |
Engine Size | 7205 cc | 1600 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 350 HP | 136 HP |
Engine RPM | 4400 RPM | 6300 RPM |
Torque | 651 Nm | 167 Nm |
Torque RPM | 2800 RPM | 4850 RPM |
Engine Bore Size | 109.7 mm | 77 mm |
Engine Stroke Size | 95.3 mm | 85 mm |
Drive Type | Rear | Front |
Transmission Type | Automatic | 6-speed manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1956 kg | 1096 kg |
Vehicle Length | 5570 mm | 4045 mm |
Vehicle Width | 2030 mm | 1720 mm |
Vehicle Height | 1420 mm | 1455 mm |
Wheelbase Size | 3160 mm | 2570 mm |
Fuel Tank Capacity | 100 L | 43 L |