1966 Ferrari 250 LM vs. 2000 Holden Vectra

To start off, 2000 Holden Vectra is newer by 34 year(s). Which means there will be less support and parts availability for 1966 Ferrari 250 LM. In addition, the cost of maintenance, including insurance, on 1966 Ferrari 250 LM would be higher. At 3,286 cc (12 cylinders), 1966 Ferrari 250 LM is equipped with a bigger engine. In terms of performance, 1966 Ferrari 250 LM (317 HP @ 7500 RPM) has 177 more horse power than 2000 Holden Vectra. (140 HP @ 5200 RPM). In normal driving conditions, 1966 Ferrari 250 LM should accelerate faster than 2000 Holden Vectra. With that said, vehicle weight also plays an important factor in acceleration. 2000 Holden Vectra weights approximately 450 kg more than 1966 Ferrari 250 LM.

Because 1966 Ferrari 250 LM is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Ferrari 250 LM. However, in wet, icy, snow, or gravel driving conditions, 2000 Holden Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Ferrari 250 LM (313 Nm @ 5500 RPM) has 113 more torque (in Nm) than 2000 Holden Vectra. (200 Nm @ 4000 RPM). This means 1966 Ferrari 250 LM will have an easier job in driving up hills or pulling heavy equipment than 2000 Holden Vectra. 2000 Holden Vectra has automatic transmission and 1966 Ferrari 250 LM has manual transmission. 1966 Ferrari 250 LM will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Holden Vectra will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Ferrari 250 LM 2000 Holden Vectra
Make Ferrari Holden
Model 250 LM Vectra
Year Released 1966 2000
Body Type Coupe Sedan
Engine Position Middle Front
Engine Size 3286 cc 2198 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 317 HP 140 HP
Engine RPM 7500 RPM 5200 RPM
Torque 313 Nm 200 Nm
Torque RPM 5500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Doors 2 doors 4 doors
Vehicle Weight 850 kg 1300 kg
Vehicle Length 4100 mm 4500 mm
Vehicle Width 1710 mm 1710 mm
Vehicle Height 1120 mm 1430 mm
Wheelbase Size 2410 mm 2650 mm