1966 Fiat 2300 vs. 1997 Lancia K

To start off, 1997 Lancia K is newer by 31 year(s). Which means there will be less support and parts availability for 1966 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1966 Fiat 2300 would be higher. At 2,958 cc (6 cylinders), 1997 Lancia K is equipped with a bigger engine. In terms of performance, 1997 Lancia K (201 HP @ 6300 RPM) has 67 more horse power than 1966 Fiat 2300. (134 HP @ 5600 RPM) In normal driving conditions, 1997 Lancia K should accelerate faster than 1966 Fiat 2300. With that said, vehicle weight also plays an important factor in acceleration. 1997 Lancia K weights approximately 205 kg more than 1966 Fiat 2300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Fiat 2300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Fiat 2300. However, in wet, icy, snow, or gravel driving conditions, 1997 Lancia K, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Lancia K (270 Nm @ 4500 RPM) has 91 more torque (in Nm) than 1966 Fiat 2300. (179 Nm @ 4000 RPM). This means 1997 Lancia K will have an easier job in driving up hills or pulling heavy equipment than 1966 Fiat 2300. 1997 Lancia K has automatic transmission and 1966 Fiat 2300 has manual transmission. 1966 Fiat 2300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1997 Lancia K will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Fiat 2300 1997 Lancia K
Make Fiat Lancia
Model 2300 K
Year Released 1966 1997
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 2279 cc 2958 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 134 HP 201 HP
Engine RPM 5600 RPM 6300 RPM
Torque 179 Nm 270 Nm
Torque RPM 4000 RPM 4500 RPM
Engine Bore Size 78 mm 93 mm
Engine Stroke Size 79.5 mm 72.6 mm
Engine Compression Ratio 9.5:1 10.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1310 kg 1515 kg
Vehicle Length 4630 mm 4570 mm
Vehicle Width 1640 mm 1840 mm
Vehicle Height 1390 mm 1430 mm
Wheelbase Size 2660 mm 2590 mm
Fuel Tank Capacity 70 L 70 L