1966 Fiat 500 vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 44 year(s). Which means there will be less support and parts availability for 1966 Fiat 500. In addition, the cost of maintenance, including insurance, on 1966 Fiat 500 would be higher. At 2,500 cc (4 cylinders), 2010 Mazda 3 is equipped with a bigger engine. In terms of performance, 2010 Mazda 3 (167 HP @ 6000 RPM) has 145 more horse power than 1966 Fiat 500. (22 HP @ 4400 RPM) In normal driving conditions, 2010 Mazda 3 should accelerate faster than 1966 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 3 weights approximately 843 kg more than 1966 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 3 (228 Nm @ 4000 RPM) has 192 more torque (in Nm) than 1966 Fiat 500. (36 Nm @ 2800 RPM). This means 2010 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1966 Fiat 500. 2010 Mazda 3 has automatic transmission and 1966 Fiat 500 has manual transmission. 1966 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Fiat 500 2010 Mazda 3
Make Fiat Mazda
Model 500 3
Year Released 1966 2010
Body Type Coupe Hatchback
Engine Position Rear Front
Engine Size 499 cc 2500 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 22 HP 167 HP
Engine RPM 4400 RPM 6000 RPM
Torque 36 Nm 228 Nm
Torque RPM 2800 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 540 kg 1383 kg
Vehicle Length 3190 mm 4506 mm
Vehicle Width 1330 mm 1755 mm
Vehicle Height 1360 mm 1471 mm
Wheelbase Size 1950 mm 2639 mm
Fuel Tank Capacity 38 L 60 L