1966 Fiat Cabriolet vs. 1950 Jeep CJ3A

To start off, 1966 Fiat Cabriolet is newer by 16 year(s). Which means there will be less support and parts availability for 1950 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1950 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1950 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1966 Fiat Cabriolet (62 HP @ 5300 RPM) has 3 more horse power than 1950 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1966 Fiat Cabriolet should accelerate faster than 1950 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1950 Jeep CJ3A weights approximately 220 kg more than 1966 Fiat Cabriolet.

Because 1950 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1966 Fiat Cabriolet. In wet, icy, snow, or gravel driving conditions, 1950 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Jeep CJ3A (145 Nm @ 3600 RPM) has 51 more torque (in Nm) than 1966 Fiat Cabriolet. (94 Nm @ 4000 RPM). This means 1950 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1966 Fiat Cabriolet.

Compare all specifications:

1966 Fiat Cabriolet 1950 Jeep CJ3A
Make Fiat Jeep
Model Cabriolet CJ3A
Year Released 1966 1950
Body Type Convertible SUV
Engine Position Front Front
Engine Size 1221 cc 2199 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 62 HP 59 HP
Engine RPM 5300 RPM 3600 RPM
Torque 94 Nm 145 Nm
Torque RPM 4000 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Vehicle Weight 890 kg 1110 kg
Vehicle Length 4040 mm 3130 mm
Vehicle Width 1530 mm 1460 mm
Vehicle Height 1310 mm 1630 mm
Wheelbase Size 2350 mm 2040 mm