1966 Fiat Cabriolet vs. 1979 Holden Gemini

To start off, 1979 Holden Gemini is newer by 13 year(s). Which means there will be less support and parts availability for 1966 Fiat Cabriolet. In addition, the cost of maintenance, including insurance, on 1966 Fiat Cabriolet would be higher. At 1,584 cc (4 cylinders), 1979 Holden Gemini is equipped with a bigger engine. In terms of performance, 1979 Holden Gemini (67 HP @ 5400 RPM) has 5 more horse power than 1966 Fiat Cabriolet. (62 HP @ 5300 RPM) In normal driving conditions, 1979 Holden Gemini should accelerate faster than 1966 Fiat Cabriolet. With that said, vehicle weight also plays an important factor in acceleration. 1979 Holden Gemini weights approximately 65 kg more than 1966 Fiat Cabriolet. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 Holden Gemini (110 Nm @ 3200 RPM) has 16 more torque (in Nm) than 1966 Fiat Cabriolet. (94 Nm @ 4000 RPM). This means 1979 Holden Gemini will have an easier job in driving up hills or pulling heavy equipment than 1966 Fiat Cabriolet.

Compare all specifications:

1966 Fiat Cabriolet 1979 Holden Gemini
Make Fiat Holden
Model Cabriolet Gemini
Year Released 1966 1979
Engine Position Front Front
Engine Size 1221 cc 1584 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 62 HP 67 HP
Engine RPM 5300 RPM 5400 RPM
Torque 94 Nm 110 Nm
Torque RPM 4000 RPM 3200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 890 kg 955 kg
Vehicle Length 4040 mm 4240 mm
Vehicle Width 1530 mm 1580 mm
Vehicle Height 1310 mm 1340 mm
Wheelbase Size 2350 mm 2410 mm