1966 Fiat Coupe vs. 2008 Honda CR-V
To start off, 2008 Honda CR-V is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1966 Fiat Coupe would be higher. At 2,279 cc (6 cylinders), 1966 Fiat Coupe is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2008 Honda CR-V weights approximately 240 kg more than 1966 Fiat Coupe.
Let's talk about torque, 1966 Fiat Coupe (201 Nm @ 4000 RPM) has 9 more torque (in Nm) than 2008 Honda CR-V. (192 Nm @ 4000 RPM). This means 1966 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 2008 Honda CR-V.
Compare all specifications:
| 1966 Fiat Coupe | 2008 Honda CR-V | |
| Make | Fiat | Honda |
| Model | Coupe | CR-V |
| Year Released | 1966 | 2008 |
| Body Type | Coupe | SUV |
| Engine Position | Front | Front |
| Engine Size | 2279 cc | 1998 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 148 HP | 148 HP |
| Engine RPM | 5600 RPM | 6500 RPM |
| Torque | 201 Nm | 192 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Engine Bore Size | 78 mm | 86 mm |
| Engine Stroke Size | 79.5 mm | 86 mm |
| Fuel Type | Gasoline | Gasoline - Premium |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1230 kg | 1470 kg |
| Vehicle Length | 4630 mm | 4570 mm |
| Vehicle Width | 1640 mm | 1790 mm |
| Vehicle Height | 1370 mm | 1720 mm |
| Wheelbase Size | 2660 mm | 2640 mm |
| Fuel Tank Capacity | 70 L | 58 L |
