1966 Ginetta G11 vs. 2008 MG TF
To start off, 2008 MG TF is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Ginetta G11. In addition, the cost of maintenance, including insurance, on 1966 Ginetta G11 would be higher. At 1,788 cc (4 cylinders), 1966 Ginetta G11 is equipped with a bigger engine. In terms of performance, 2008 MG TF (114 HP @ 6250 RPM) has 20 more horse power than 1966 Ginetta G11. (94 HP @ 5400 RPM) In normal driving conditions, 2008 MG TF should accelerate faster than 1966 Ginetta G11. With that said, vehicle weight also plays an important factor in acceleration. 2008 MG TF weights approximately 294 kg more than 1966 Ginetta G11. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1966 Ginetta G11 | 2008 MG TF | |
| Make | Ginetta | MG |
| Model | G11 | TF |
| Year Released | 1966 | 2008 |
| Engine Position | Front | Middle |
| Engine Size | 1788 cc | 1588 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 94 HP | 114 HP |
| Engine RPM | 5400 RPM | 6250 RPM |
| Engine Compression Ratio | 8.8:1 | 10.5:1 |
| Top Speed | 177 km/hour | 185 km/hour |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 876 kg | 1170 kg |
| Vehicle Length | 3990 mm | 3950 mm |
| Vehicle Width | 1510 mm | 1630 mm |
| Wheelbase Size | 2290 mm | 2380 mm |
