1966 Lancia Flaminia vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 44 year(s). Which means there will be less support and parts availability for 1966 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1966 Lancia Flaminia would be higher. At 2,775 cc (6 cylinders), 1966 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (183 HP @ 5500 RPM) has 45 more horse power than 1966 Lancia Flaminia. (138 HP @ 5400 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1966 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 300 kg more than 1966 Lancia Flaminia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (256 Nm @ 4000 RPM) has 34 more torque (in Nm) than 1966 Lancia Flaminia. (222 Nm @ 3000 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1966 Lancia Flaminia. 2010 Chrysler Sebring has automatic transmission and 1966 Lancia Flaminia has manual transmission. 1966 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Lancia Flaminia | 2010 Chrysler Sebring | |
Make | Lancia | Chrysler |
Model | Flaminia | Sebring |
Year Released | 1966 | 2010 |
Body Type | Coupe | Convertible |
Engine Position | Front | Front |
Engine Size | 2775 cc | 2736 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 138 HP | 183 HP |
Engine RPM | 5400 RPM | 5500 RPM |
Torque | 222 Nm | 256 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1520 kg | 1820 kg |
Vehicle Length | 4690 mm | 4940 mm |
Vehicle Width | 1750 mm | 1850 mm |
Vehicle Height | 1430 mm | 1490 mm |
Wheelbase Size | 2760 mm | 2770 mm |
Fuel Consumption Overall | 10.1 L/100km | 10.7 L/100km |
Fuel Tank Capacity | 56 L | 63 L |