1966 Lancia Flavia vs. 1993 Mercedes-Benz C
To start off, 1993 Mercedes-Benz C is newer by 27 year(s). Which means there will be less support and parts availability for 1966 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1966 Lancia Flavia would be higher. At 3,606 cc (6 cylinders), 1993 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 1993 Mercedes-Benz C (276 HP @ 5750 RPM) has 175 more horse power than 1966 Lancia Flavia. (101 HP @ 5200 RPM) In normal driving conditions, 1993 Mercedes-Benz C should accelerate faster than 1966 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mercedes-Benz C weights approximately 400 kg more than 1966 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz C is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz C. However, in wet, icy, snow, or gravel driving conditions, 1966 Lancia Flavia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mercedes-Benz C (385 Nm @ 4000 RPM) has 232 more torque (in Nm) than 1966 Lancia Flavia. (153 Nm @ 3500 RPM). This means 1993 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 1966 Lancia Flavia. 1993 Mercedes-Benz C has automatic transmission and 1966 Lancia Flavia has manual transmission. 1966 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Mercedes-Benz C will be easier to drive especially in heavy traffic.
Compare all specifications:
1966 Lancia Flavia | 1993 Mercedes-Benz C | |
Make | Lancia | Mercedes-Benz |
Model | Flavia | C |
Year Released | 1966 | 1993 |
Engine Position | Front | Front |
Engine Size | 1800 cc | 3606 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | boxer | in-line |
Horse Power | 101 HP | 276 HP |
Engine RPM | 5200 RPM | 5750 RPM |
Torque | 153 Nm | 385 Nm |
Torque RPM | 3500 RPM | 4000 RPM |
Engine Compression Ratio | 9.0:1 | 10.5:1 |
Top Speed | 171 km/hour | 245 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1160 kg | 1560 kg |
Vehicle Length | 4590 mm | 4490 mm |
Vehicle Width | 1630 mm | 1730 mm |
Vehicle Height | 1490 mm | 1420 mm |
Wheelbase Size | 2660 mm | 2700 mm |
Fuel Tank Capacity | 55 L | 62 L |