1966 Lancia Flavia vs. 2009 Mazda 3

To start off, 2009 Mazda 3 is newer by 43 year(s). Which means there will be less support and parts availability for 1966 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1966 Lancia Flavia would be higher. At 2,258 cc (4 cylinders), 2009 Mazda 3 is equipped with a bigger engine. In terms of performance, 2009 Mazda 3 (156 HP @ 6500 RPM) has 55 more horse power than 1966 Lancia Flavia. (101 HP @ 5200 RPM) In normal driving conditions, 2009 Mazda 3 should accelerate faster than 1966 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1966 Lancia Flavia weights approximately 35 kg more than 2009 Mazda 3.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mazda 3 (203 Nm @ 4500 RPM) has 50 more torque (in Nm) than 1966 Lancia Flavia. (153 Nm @ 3500 RPM). This means 2009 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1966 Lancia Flavia.

Compare all specifications:

1966 Lancia Flavia 2009 Mazda 3
Make Lancia Mazda
Model Flavia 3
Year Released 1966 2009
Engine Position Front Front
Engine Size 1800 cc 2258 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 101 HP 156 HP
Engine RPM 5200 RPM 6500 RPM
Torque 153 Nm 203 Nm
Torque RPM 3500 RPM 4500 RPM
Engine Compression Ratio 9.0:1 10.8:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1160 kg 1125 kg
Vehicle Length 4590 mm 4500 mm
Vehicle Width 1630 mm 1760 mm
Vehicle Height 1490 mm 1470 mm
Wheelbase Size 2660 mm 2650 mm
Fuel Tank Capacity 55 L 55 L