1966 Lancia Fulvia vs. 2008 Mazda DrifterX

To start off, 2008 Mazda DrifterX is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1966 Lancia Fulvia would be higher. At 2,497 cc (4 cylinders), 2008 Mazda DrifterX is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda DrifterX weights approximately 434 kg more than 1966 Lancia Fulvia.

Because 2008 Mazda DrifterX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mazda DrifterX. However, in wet, icy, snow, or gravel driving conditions, 1966 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda DrifterX (257 Nm @ 2000 RPM) has 153 more torque (in Nm) than 1966 Lancia Fulvia. (104 Nm @ 4000 RPM). This means 2008 Mazda DrifterX will have an easier job in driving up hills or pulling heavy equipment than 1966 Lancia Fulvia.

Compare all specifications:

1966 Lancia Fulvia 2008 Mazda DrifterX
Make Lancia Mazda
Model Fulvia DrifterX
Year Released 1966 2008
Engine Position Front Front
Engine Size 1216 cc 2497 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type V in-line
Horse Power 80 HP 0 HP
Torque 104 Nm 257 Nm
Torque RPM 4000 RPM 2000 RPM
Engine Compression Ratio 9.0:1 21.6:1
Top Speed 151 km/hour 150 km/hour
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1046 kg 1480 kg
Vehicle Length 4120 mm 4500 mm
Vehicle Height 1400 mm 1760 mm
Wheelbase Size 2480 mm 3010 mm
Fuel Tank Capacity 38 L 82 L