1966 Mercedes-Benz 250 vs. 2010 Hyundai Getz

To start off, 2010 Hyundai Getz is newer by 44 year(s). Which means there will be less support and parts availability for 1966 Mercedes-Benz 250. In addition, the cost of maintenance, including insurance, on 1966 Mercedes-Benz 250 would be higher. At 2,496 cc (6 cylinders), 1966 Mercedes-Benz 250 is equipped with a bigger engine. In terms of performance, 1966 Mercedes-Benz 250 (150 HP @ 5500 RPM) has 46 more horse power than 2010 Hyundai Getz. (104 HP @ 5800 RPM). In normal driving conditions, 1966 Mercedes-Benz 250 should accelerate faster than 2010 Hyundai Getz. With that said, vehicle weight also plays an important factor in acceleration. 1966 Mercedes-Benz 250 weights approximately 197 kg more than 2010 Hyundai Getz. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1966 Mercedes-Benz 250 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Mercedes-Benz 250. However, in wet, icy, snow, or gravel driving conditions, 2010 Hyundai Getz, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Mercedes-Benz 250 (216 Nm @ 4200 RPM) has 73 more torque (in Nm) than 2010 Hyundai Getz. (143 Nm @ 3200 RPM). This means 1966 Mercedes-Benz 250 will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai Getz. 2010 Hyundai Getz has automatic transmission and 1966 Mercedes-Benz 250 has manual transmission. 1966 Mercedes-Benz 250 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Hyundai Getz will be easier to drive especially in heavy traffic.

Compare all specifications:

1966 Mercedes-Benz 250 2010 Hyundai Getz
Make Mercedes-Benz Hyundai
Model 250 Getz
Year Released 1966 2010
Engine Position Front Front
Engine Size 2496 cc 1599 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 150 HP 104 HP
Engine RPM 5500 RPM 5800 RPM
Torque 216 Nm 143 Nm
Torque RPM 4200 RPM 3200 RPM
Engine Compression Ratio 9.5:1 10.0:1
Top Speed 200 km/hour 171 km/hour
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1360 kg 1163 kg
Vehicle Length 4290 mm 3820 mm
Vehicle Width 1770 mm 1670 mm
Vehicle Height 1330 mm 1500 mm
Wheelbase Size 2410 mm 2460 mm
Fuel Tank Capacity 82 L 45 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]