1967 Abarth 1300 vs. 1964 Jaguar 3.8
To start off, 1967 Abarth 1300 is newer by 3 year(s). Which means there will be less support and parts availability for 1964 Jaguar 3.8. In addition, the cost of maintenance, including insurance, on 1964 Jaguar 3.8 would be higher. At 3,781 cc (6 cylinders), 1964 Jaguar 3.8 is equipped with a bigger engine. In terms of performance, 1964 Jaguar 3.8 (221 HP @ 5500 RPM) has 98 more horse power than 1967 Abarth 1300. (123 HP @ 7200 RPM) In normal driving conditions, 1964 Jaguar 3.8 should accelerate faster than 1967 Abarth 1300. With that said, vehicle weight also plays an important factor in acceleration. 1964 Jaguar 3.8 weights approximately 945 kg more than 1967 Abarth 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1964 Jaguar 3.8 (325 Nm @ 3000 RPM) has 192 more torque (in Nm) than 1967 Abarth 1300. (133 Nm @ 6000 RPM). This means 1964 Jaguar 3.8 will have an easier job in driving up hills or pulling heavy equipment than 1967 Abarth 1300.
Compare all specifications:
1967 Abarth 1300 | 1964 Jaguar 3.8 | |
Make | Abarth | Jaguar |
Model | 1300 | 3.8 |
Year Released | 1967 | 1964 |
Engine Position | Rear | Front |
Engine Size | 1278 cc | 3781 cc |
Horse Power | 123 HP | 221 HP |
Engine RPM | 7200 RPM | 5500 RPM |
Torque | 133 Nm | 325 Nm |
Torque RPM | 6000 RPM | 3000 RPM |
Engine Bore Size | 76 mm | 87 mm |
Engine Stroke Size | 71 mm | 106 mm |
Engine Compression Ratio | 10.5:1 | 8.0:1 |
Fuel Type | Gasoline | Gasoline |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 630 kg | 1575 kg |
Vehicle Length | 3560 mm | 4780 mm |
Vehicle Width | 1490 mm | 1700 mm |
Vehicle Height | 1140 mm | 1390 mm |
Wheelbase Size | 2100 mm | 2740 mm |
Fuel Tank Capacity | 30 L | 63 L |