1967 Abarth 1300 vs. 2010 Fiat Ulysse
To start off, 2010 Fiat Ulysse is newer by 43 year(s). Which means there will be less support and parts availability for 1967 Abarth 1300. In addition, the cost of maintenance, including insurance, on 1967 Abarth 1300 would be higher. At 2,179 cc (4 cylinders), 2010 Fiat Ulysse is equipped with a bigger engine. In terms of performance, 2010 Fiat Ulysse (126 HP @ 4000 RPM) has 3 more horse power than 1967 Abarth 1300. (123 HP @ 7200 RPM) In normal driving conditions, 2010 Fiat Ulysse should accelerate faster than 1967 Abarth 1300. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Ulysse weights approximately 1158 kg more than 1967 Abarth 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2010 Fiat Ulysse (314 Nm @ 2000 RPM) has 181 more torque (in Nm) than 1967 Abarth 1300. (133 Nm @ 6000 RPM). This means 2010 Fiat Ulysse will have an easier job in driving up hills or pulling heavy equipment than 1967 Abarth 1300.
Compare all specifications:
1967 Abarth 1300 | 2010 Fiat Ulysse | |
Make | Abarth | Fiat |
Model | 1300 | Ulysse |
Year Released | 1967 | 2010 |
Engine Position | Rear | Front |
Engine Size | 1278 cc | 2179 cc |
Horse Power | 123 HP | 126 HP |
Engine RPM | 7200 RPM | 4000 RPM |
Torque | 133 Nm | 314 Nm |
Torque RPM | 6000 RPM | 2000 RPM |
Engine Bore Size | 76 mm | 85 mm |
Engine Stroke Size | 71 mm | 96 mm |
Engine Compression Ratio | 10.5:1 | 18.0:1 |
Fuel Type | Gasoline | Diesel |
Transmission Type | Manual | Manual |
Vehicle Weight | 630 kg | 1788 kg |
Vehicle Length | 3560 mm | 4730 mm |
Vehicle Width | 1490 mm | 1870 mm |
Vehicle Height | 1140 mm | 1760 mm |
Wheelbase Size | 2100 mm | 2830 mm |
Fuel Tank Capacity | 30 L | 80 L |