1967 AC 428 vs. 1963 Ferrari 250 GTO

To start off, 1967 AC 428 is newer by 4 year(s). Which means there will be less support and parts availability for 1963 Ferrari 250 GTO. In addition, the cost of maintenance, including insurance, on 1963 Ferrari 250 GTO would be higher. At 7,010 cc (8 cylinders), 1967 AC 428 is equipped with a bigger engine. In terms of performance, 1967 AC 428 (345 HP @ 4600 RPM) has 45 more horse power than 1963 Ferrari 250 GTO. (300 HP @ 7500 RPM). In normal driving conditions, 1967 AC 428 should accelerate faster than 1963 Ferrari 250 GTO. With that said, vehicle weight also plays an important factor in acceleration. 1967 AC 428 weights approximately 533 kg more than 1963 Ferrari 250 GTO. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 AC 428 (626 Nm @ 2800 RPM) has 332 more torque (in Nm) than 1963 Ferrari 250 GTO. (294 Nm @ 5500 RPM). This means 1967 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 1963 Ferrari 250 GTO. 1967 AC 428 has automatic transmission and 1963 Ferrari 250 GTO has manual transmission. 1963 Ferrari 250 GTO will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1967 AC 428 will be easier to drive especially in heavy traffic.

Compare all specifications:

1967 AC 428 1963 Ferrari 250 GTO
Make AC Ferrari
Model 428 250 GTO
Year Released 1967 1963
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 7010 cc 2953 cc
Engine Cylinders 8 cylinders 12 cylinders
Engine Type V V
Valves per Cylinder 2 valves 2 valves
Horse Power 345 HP 300 HP
Engine RPM 4600 RPM 7500 RPM
Torque 626 Nm 294 Nm
Torque RPM 2800 RPM 5500 RPM
Engine Bore Size 105 mm 73.1 mm
Engine Stroke Size 101.2 mm 58.8 mm
Engine Compression Ratio 10.5:1 9.8:1
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1483 kg 950 kg
Vehicle Length 4520 mm 4410 mm
Vehicle Width 1710 mm 1680 mm
Vehicle Height 1260 mm 1230 mm
Wheelbase Size 2440 mm 2410 mm
Fuel Tank Capacity 85 L 133 L