1967 AC 428 vs. 1999 Lancia Kappa

To start off, 1999 Lancia Kappa is newer by 32 year(s). Which means there will be less support and parts availability for 1967 AC 428. In addition, the cost of maintenance, including insurance, on 1967 AC 428 would be higher. At 7,010 cc (8 cylinders), 1967 AC 428 is equipped with a bigger engine. In terms of performance, 1967 AC 428 (345 HP @ 4600 RPM) has 143 more horse power than 1999 Lancia Kappa. (202 HP @ 5600 RPM). In normal driving conditions, 1967 AC 428 should accelerate faster than 1999 Lancia Kappa. With that said, vehicle weight also plays an important factor in acceleration. 1999 Lancia Kappa weights approximately 67 kg more than 1967 AC 428.

Because 1967 AC 428 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 AC 428. However, in wet, icy, snow, or gravel driving conditions, 1999 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 AC 428 (626 Nm @ 2800 RPM) has 328 more torque (in Nm) than 1999 Lancia Kappa. (298 Nm @ 2750 RPM). This means 1967 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 1999 Lancia Kappa. 1967 AC 428 has automatic transmission and 1999 Lancia Kappa has manual transmission. 1999 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1967 AC 428 will be easier to drive especially in heavy traffic.

Compare all specifications:

1967 AC 428 1999 Lancia Kappa
Make AC Lancia
Model 428 Kappa
Year Released 1967 1999
Body Type Coupe Station Wagon
Engine Position Front Front
Engine Size 7010 cc 1995 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 345 HP 202 HP
Engine RPM 4600 RPM 5600 RPM
Torque 626 Nm 298 Nm
Torque RPM 2800 RPM 2750 RPM
Engine Bore Size 105 mm 84.1 mm
Engine Stroke Size 101.2 mm 90 mm
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1483 kg 1550 kg
Vehicle Length 4520 mm 4700 mm
Vehicle Width 1710 mm 1840 mm
Vehicle Height 1260 mm 1470 mm
Wheelbase Size 2440 mm 2710 mm