1967 AC 428 vs. 2008 BMW 330

To start off, 2008 BMW 330 is newer by 41 year(s). Which means there will be less support and parts availability for 1967 AC 428. In addition, the cost of maintenance, including insurance, on 1967 AC 428 would be higher. At 7,010 cc (8 cylinders), 1967 AC 428 is equipped with a bigger engine. In terms of performance, 1967 AC 428 (345 HP @ 4600 RPM) has 117 more horse power than 2008 BMW 330. (228 HP @ 5900 RPM). In normal driving conditions, 1967 AC 428 should accelerate faster than 2008 BMW 330. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 330 weights approximately 22 kg more than 1967 AC 428.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 AC 428 (626 Nm @ 2800 RPM) has 326 more torque (in Nm) than 2008 BMW 330. (300 Nm @ 3500 RPM). This means 1967 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 330.

Compare all specifications:

1967 AC 428 2008 BMW 330
Make AC BMW
Model 428 330
Year Released 1967 2008
Body Type Coupe Convertible
Engine Position Front Front
Engine Size 7010 cc 2979 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 345 HP 228 HP
Engine RPM 4600 RPM 5900 RPM
Torque 626 Nm 300 Nm
Torque RPM 2800 RPM 3500 RPM
Engine Compression Ratio 10.5:1 10.2:1
Top Speed 233 km/hour 245 km/hour
Drive Type Rear Rear
Transmission Type Automatic Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1483 kg 1505 kg
Vehicle Length 4520 mm 4480 mm
Vehicle Width 1710 mm 1750 mm
Vehicle Height 1260 mm 1420 mm
Wheelbase Size 2440 mm 2730 mm
Fuel Tank Capacity 85 L 63 L