1967 Alfa Romeo GTA vs. 1958 Holden FE

To start off, 1967 Alfa Romeo GTA is newer by 9 year(s). Which means there will be less support and parts availability for 1958 Holden FE. In addition, the cost of maintenance, including insurance, on 1958 Holden FE would be higher. At 2,166 cc (6 cylinders), 1958 Holden FE is equipped with a bigger engine. In terms of performance, 1967 Alfa Romeo GTA (93 HP @ 6000 RPM) has 33 more horse power than 1958 Holden FE. (60 HP @ 4000 RPM). In normal driving conditions, 1967 Alfa Romeo GTA should accelerate faster than 1958 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1958 Holden FE weights approximately 190 kg more than 1967 Alfa Romeo GTA.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Holden FE (150 Nm @ 1200 RPM) has 10 more torque (in Nm) than 1967 Alfa Romeo GTA. (140 Nm @ 3200 RPM). This means 1958 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1967 Alfa Romeo GTA.

Compare all specifications:

1967 Alfa Romeo GTA 1958 Holden FE
Make Alfa Romeo Holden
Model GTA FE
Year Released 1967 1958
Engine Position Front Front
Engine Size 1290 cc 2166 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 93 HP 60 HP
Engine RPM 6000 RPM 4000 RPM
Torque 140 Nm 150 Nm
Torque RPM 3200 RPM 1200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 790 kg 980 kg
Vehicle Length 4090 mm 4480 mm
Vehicle Width 1590 mm 1710 mm
Vehicle Height 1320 mm 1560 mm
Wheelbase Size 2360 mm 2670 mm