1967 Alpine A vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 41 year(s). Which means there will be less support and parts availability for 1967 Alpine A. In addition, the cost of maintenance, including insurance, on 1967 Alpine A would be higher. At 2,299 cc (4 cylinders), 2008 Mazda 6 is equipped with a bigger engine. In terms of performance, 2008 Mazda 6 (156 HP @ 6500 RPM) has 80 more horse power than 1967 Alpine A. (76 HP @ 6000 RPM) In normal driving conditions, 2008 Mazda 6 should accelerate faster than 1967 Alpine A. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 6 weights approximately 716 kg more than 1967 Alpine A. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1967 Alpine A is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Alpine A. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1967 Alpine A 2008 Mazda 6
Make Alpine Mazda
Model A 6
Year Released 1967 2008
Engine Position Rear Front
Engine Size 1468 cc 2299 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 76 HP 156 HP
Engine RPM 6000 RPM 6500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 700 kg 1416 kg
Vehicle Length 3860 mm 4780 mm
Vehicle Width 1470 mm 1790 mm
Vehicle Height 1140 mm 1460 mm
Wheelbase Size 2140 mm 2680 mm
Fuel Tank Capacity 62 L 64 L