1967 Alvis TF vs. 2005 Mazda RX-8

To start off, 2005 Mazda RX-8 is newer by 38 year(s). Which means there will be less support and parts availability for 1967 Alvis TF. In addition, the cost of maintenance, including insurance, on 1967 Alvis TF would be higher. At 2,993 cc (6 cylinders), 1967 Alvis TF is equipped with a bigger engine. In terms of performance, 2005 Mazda RX-8 (228 HP @ 8200 RPM) has 78 more horse power than 1967 Alvis TF. (150 HP @ 4750 RPM) In normal driving conditions, 2005 Mazda RX-8 should accelerate faster than 1967 Alvis TF. With that said, vehicle weight also plays an important factor in acceleration. 1967 Alvis TF weights approximately 485 kg more than 2005 Mazda RX-8.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Alvis TF (247 Nm @ 3750 RPM) has 36 more torque (in Nm) than 2005 Mazda RX-8. (211 Nm @ 5500 RPM). This means 1967 Alvis TF will have an easier job in driving up hills or pulling heavy equipment than 2005 Mazda RX-8.

Compare all specifications:

1967 Alvis TF 2005 Mazda RX-8
Make Alvis Mazda
Model TF RX-8
Year Released 1967 2005
Engine Position Front Front
Engine Size 2993 cc 1308 cc
Engine Type in-line dual-disk rotary
Horse Power 150 HP 228 HP
Engine RPM 4750 RPM 8200 RPM
Torque 247 Nm 211 Nm
Torque RPM 3750 RPM 5500 RPM
Engine Compression Ratio 9.0:1 10.0:1
Top Speed 188 km/hour 235 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1550 kg 1065 kg
Wheelbase Size 2840 mm 2840 mm
Fuel Tank Capacity 64 L 61 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]