1967 Austin 1300 vs. 1955 Studebaker President State

To start off, 1967 Austin 1300 is newer by 12 year(s). Which means there will be less support and parts availability for 1955 Studebaker President State. In addition, the cost of maintenance, including insurance, on 1955 Studebaker President State would be higher. At 4,244 cc (8 cylinders), 1955 Studebaker President State is equipped with a bigger engine. In terms of performance, 1955 Studebaker President State (174 HP @ 4500 RPM) has 115 more horse power than 1967 Austin 1300. (59 HP @ 5250 RPM) In normal driving conditions, 1955 Studebaker President State should accelerate faster than 1967 Austin 1300. With that said, vehicle weight also plays an important factor in acceleration. 1955 Studebaker President State weights approximately 692 kg more than 1967 Austin 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1955 Studebaker President State is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Studebaker President State. However, in wet, icy, snow, or gravel driving conditions, 1967 Austin 1300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Studebaker President State (353 Nm) has 259 more torque (in Nm) than 1967 Austin 1300. (94 Nm). This means 1955 Studebaker President State will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin 1300.

Compare all specifications:

1967 Austin 1300 1955 Studebaker President State
Make Austin Studebaker
Model 1300 President State
Year Released 1967 1955
Engine Position Front Front
Engine Size 1275 cc 4244 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Horse Power 59 HP 174 HP
Engine RPM 5250 RPM 4500 RPM
Torque 94 Nm 353 Nm
Engine Bore Size 70.6 mm 90.5 mm
Engine Stroke Size 81.3 mm 82.6 mm
Engine Compression Ratio 8.8:1 8.5:1
Drive Type Front Rear
Vehicle Weight 858 kg 1550 kg
Vehicle Length 3730 mm 5250 mm
Vehicle Width 1540 mm 1770 mm
Vehicle Height 1350 mm 1530 mm
Wheelbase Size 2380 mm 3070 mm