1967 Austin 1300 vs. 1966 Chrysler New Yorker
To start off, 1967 Austin 1300 is newer by 1 year(s). Which means there will be less support and parts availability for 1966 Chrysler New Yorker. In addition, the cost of maintenance, including insurance, on 1966 Chrysler New Yorker would be higher. At 7,205 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (350 HP @ 4400 RPM) has 291 more horse power than 1967 Austin 1300. (59 HP @ 5250 RPM) In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 1967 Austin 1300. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 1098 kg more than 1967 Austin 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Chrysler New Yorker is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Chrysler New Yorker. However, in wet, icy, snow, or gravel driving conditions, 1967 Austin 1300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (651 Nm @ 2800 RPM) has 557 more torque (in Nm) than 1967 Austin 1300. (94 Nm @ 2500 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin 1300. 1966 Chrysler New Yorker has automatic transmission and 1967 Austin 1300 has manual transmission. 1967 Austin 1300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1967 Austin 1300 | 1966 Chrysler New Yorker | |
| Make | Austin | Chrysler |
| Model | 1300 | New Yorker |
| Year Released | 1967 | 1966 |
| Engine Position | Front | Front |
| Engine Size | 1275 cc | 7205 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 59 HP | 350 HP |
| Engine RPM | 5250 RPM | 4400 RPM |
| Torque | 94 Nm | 651 Nm |
| Torque RPM | 2500 RPM | 2800 RPM |
| Engine Bore Size | 70.6 mm | 109.7 mm |
| Engine Stroke Size | 81.3 mm | 95.3 mm |
| Engine Compression Ratio | 8.8:1 | 9.7:1 |
| Top Speed | 140 km/hour | 193 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 858 kg | 1956 kg |
| Vehicle Length | 3730 mm | 5570 mm |
| Vehicle Width | 1540 mm | 2030 mm |
| Vehicle Height | 1350 mm | 1420 mm |
| Wheelbase Size | 2380 mm | 3160 mm |
| Fuel Tank Capacity | 36 L | 100 L |
